This is an app to calculate the forces acting on a shelf angle for a given height, thickness, and type of full bed masonry veneer.

The app then designs the anchor bolt directly bolted to concrete and the steel shelf angle size to support this load. The anchor bolt capacities for the two bands of anchor bolts permitted in the design were taken from the manufacturer's published technical data.

1) HILTI

https://www.hilti.ca/medias/sys_master/documents/h01/h71/10075027570718/Technical-information-ASSET-DOC-LOC-21606451.pdf

Table 3 - Carbon Steel KWIK Bolt - TZ2 Design Loads in Normal Weight Concrete

2) UCAN

https://ucanfast.com/resource-centre/products-catalogues/ - Ucan Technical manual - Table 4 - Design Tension and Shear Capacities in Cracked Concrete at Effective Embedment (page 30)