CSA Z662.19 provides equations limiting the circumferential and longitudinal stresses in steel pipelines. The equations depend on whether the pipe is restrained from expanding or contracting in the longitudinal direction or not. Given the pipe properties and field conditions, this page performs the required checks according to sections 4.3.5.1, 4.7, and 4.8.

default-2023

outer_diameter

pipe_type

pressure

installation_temperature

maximum_design_temperature

bending_stress

torsional_stress

configuration

wall_thickness

Set only of the select menus depending on the selected application:<ol><li>Specific Application 1</li><li class="ql-indent-1">Gas (non-sour service) and HVP (non-sour service)</li><li class="ql-indent-1">CO2 (non-sour service)</li><li class="ql-indent-1">Sour service fluids</li><li>Specific Application 2</li><li class="ql-indent-1">LVP multiphase (non-sour service), LVP liquid and quasi-liquid hydrocarbon (with low flammability), and LVP oilfield water</li><li class="ql-indent-1">LVP liquid and quasi-liquid hydrocarbon (with high flammability)</li></ol>

application

OR

specific_application_1

specific_application_2

youngs_modulus

yield_strength

poissons_ratio

coefficient_of_thermal_expansion

location

operation_temperature

Geometry

Properties

Field Conditions

Loading

Application

Stress Design of Straight Pipe According to CSA Z662.19

Stress Design of Straight Pipe According to CSA Z662.19

Similar apps: